Automatic Stainless Steel Cordless Electric Kettle

August 4, 2013 - Comment

There is an auto cutout device in the kettle. It will shut off the power supply after the water is boiling; and the light will be gone off. There is an overheating protector in the kettle. In the event of overheating, such as operating without water in the kettle or the water being boil-dry, the

There is an auto cutout device in the kettle. It will shut off the power supply after the water is boiling; and the light will be gone off. There is an overheating protector in the kettle. In the event of overheating, such as operating without water in the kettle or the water being boil-dry, the kettle will be automatically shut down to prevent further damage. The filter can wash after taking down. Cord storage with anti-pull feature, when pull the power cord, be care on it to avoid damage it. How to use your kettle
It is recommended that operate the kettle several times following the below instruction and discard off the water before first use. This will remove the material or dust remained
in the appliance, which is caused by the manufacturing process. 1. Open the lid and fill water into the kettle. Then replace the lid otherwise the kettle could not be cut off power automatically after water being boiled.
Caution: The filled water level must be between the “Max” and “Min” level as indicated on the housing. Too less water will do damage to the heat element and if the water is overfilled, boiling water may be ejected.
2. Replace the kettle on the Power Base and connect to power supply. Position the kettle so that the spout of kettle is facing away from you.
3. Press the switch to “I” position and the lamp will be illuminated. And water begins to be heated up. DO NOT open the lid while the water is boiling. 4. Power will be cut off automatically and Switch will be back to “0″ position once water
has been boiled. And the lamp will be off.
5. Lift the kettle from the power base and then pour the water.
NOTE: operate carefully when pouring the water from your kettle,as boiling water will
scald.
6. The boiling process can be terminated at any time by lifting the kettle off the Power Base or pressing the Switch to “0″ position.

Product Features

  • 1.7L Stainless Steel Electric Kettle, 1500W, 120V~60HZ
  • Pull up lid, Concealed heating element, stainless steel body and transparent water gauge
  • There is an auto cutout device in the kettle. It will shut off the power supply after the water is boiling; and the light will be gone off
  • There is an overheating protector in the kettle. In the event of overheating, such as operating without water in the kettle or the water being boil-dry, the kettle will be automatically shut down to prevent further damage
  • The filter can wash after taking down. Cord storage with anti-pull feature, when pull the power cord, be care on it to avoid damage it